Weather Conditions www.hvdn.org | Dedicated to the relevancy & growth of electronics, maker & amateur radio hobbyists in the Hudson Valley

Monday, August 20, 2018

Firmware Update: TYT MD-UV380/390 Update 17.05

The TYT MD-UV380 and waterproof UV390 has just seen its first firmware update since many people first started taking shipment of this new VHF/UHF dual band dual mode (FM/DMR) hand held radio in April and May 2018.

August 2018 Firmware Version 17.05

Users of the non-GPS enabled MD-UV380 first started to report having the 17.05 firmware loaded back in July, but this update was nowhere to be found on the TYT website until August 20th 2018.

This latest firmware release has multiple versions explained below in this article.

latest md-uv380 firmware
TYT MD-UV380 Firmware Update Version
17.05 Released on August 20th 2018 is now available on the TYT website 


If you were one of the earlier adopters of the MD-UV380, its now worth updating your radio to this latest firmware which supposedly fixes something with the DTMF, channel write faults and contact database related functions, but nothing in 17.05 is a major upgrade.

After updating from FW 16.05 and 16.06, there is no easily visualized changes when moving to FW 17.05.  It is very important to use the right firmware or your radio may not function properly and you will then need to re-install the correct version. TYT website is here:

http://www.tyt888.com/?mod=download 



August 2018 Customer Programming Software (CPS)  Version 1.07 and 1.08

CPS version 1.07 and 1.08 are prepackaged with the FW 17.05 on the TYT website and there seems one small change compared to using CPS 1.05.

When trying to import the user database and writing that to the UV380, the software does not seem to crash.

It is still advisable to save any changes you make to a code plug and put it somewhere safe as covered in the "60 Days with the MD-UV380" article posted earlier this month.

Updating MD-UV380 Firmware

If the TYT MD-UV380 is your first TYT DMR radio, you may be puzzled by some of the cryptic instructions and menus on how to update your radios firmware.

The utility called "FirmwareDownloadV3.04_EN"  is what needs to be installed on your computer. This same utility can also be used for all other TYT products so is worth keeping it handy.

Beyond being able to update the radio firmware, it also lets you add a custom "splash screen" to be displayed when the radio powers up.

MD-UV380 splash screen
The size of a replacement image on the TYT MD-UV380 needs to be
 a BMP file no larger than 128 by 160 pixels of 64 by 128 pixels at 8-bit, 256 color.

Once you have decided which is the correct firmware for your radio, navigate to where the update tool installed to.  On Windows 10, mine defaulted to:

 C:\Program Files (x86)\FirmwareDownloadV3.04\DMR Firmware DownLoad v3.04_En

Select the "Open File Upgrade button, navigate to the downloaded new firmware and
then press" Download file of upgrade"  AFTER you put the MD-UV380 into DFU mode
 and have the programming cable connected to the radio.

In order to put your radio into "DFU Mode" which is required to get the radio ready for new firmware, plug the USB cable into your computer and radio. Then, hold down both the PTT and button above it while turning the radio on.  The LED on the top of the radio will alternate flashing green/red to let you know the radio is ready for the update.

Now open the update tool and proceed to load the correct firmware version for your radio.  A progress indicator will let you know its status and when it is complete.

After the update is finished, turn the radio off, unplug the cable from the radio and then turn the radio back on.

Now to make sure it updated, go to "Menu" then "Utilities" followed by "Radio Info" and finally, "Versions" which will show you the current firmware and the last version of the CPS you used to program your radio.

uv380 firmware
TYT MD-UV380 showing a successful update
to FW  17.05 on the GPS enabled version of the radio

Downloading From TYT Website

Sometimes the TYT website can be slow, but not too slow. If you would like a slightly reorganized set of files related to this article, here is a link to download everything you need to upgrade to FW 17.05 along with CPS 1.07 and 1.08 hosted on the HVDN web-server.






Subscribe To Future HVDN Notebook Updates Here