The Alinco DJ-MD5TGP can now easily be expanded to receive up to 520 MHz which is helpful to those that live in areas that use frequencies above 480 MHz such as New York City.
After upgrading the Alinco from FW 1.00 to the not 100% publicly available FW 1.04, I decided to try some key commands that did not work before while trying to reach the same frequency expansion results in the past.
Given that the Anytone AT-D868UV, AT-D878UV and BTECH 6X2 all share certain design elements as the Alinco this not all all too surprising with the latest firmware update rolled out to the Alinco DMR dual band radio.
How To Expand
Step 1: Hold down the 1 key, PTT and the side button directly underneath PTT while turning the radio on will show "DJ-MD5 TEST MODE" quickly followed by the Alinco splash screen.
Step 2: Rotate the multi-selector knob on the top of your radio to the desired operational mode and then turn off the radio.
Step 3: Your radio now will function as the mode you selected.
Using with CPS
If you read the data from your radio using the "Model" function, it should show which of the 14 options available through the test mode with the latest CPS v1.03.
Its now safe to start writing a new code plug or importing channel data again back into your radio.
Please note that you will need to inhibit or enable the transmit function on a per channel basis per your legal requirements.
Enjoy your new "receive" capability if you were looking to access frequencies above 480 MHz with a much smaller DMR capable radio compared to the Anytone or BTECH models.
After upgrading the Alinco from FW 1.00 to the not 100% publicly available FW 1.04, I decided to try some key commands that did not work before while trying to reach the same frequency expansion results in the past.
Given that the Anytone AT-D868UV, AT-D878UV and BTECH 6X2 all share certain design elements as the Alinco this not all all too surprising with the latest firmware update rolled out to the Alinco DMR dual band radio.
How To Expand
Step 1: Hold down the 1 key, PTT and the side button directly underneath PTT while turning the radio on will show "DJ-MD5 TEST MODE" quickly followed by the Alinco splash screen.
Step 2: Rotate the multi-selector knob on the top of your radio to the desired operational mode and then turn off the radio.
Step 3: Your radio now will function as the mode you selected.
Using with CPS
If you read the data from your radio using the "Model" function, it should show which of the 14 options available through the test mode with the latest CPS v1.03.
Its now safe to start writing a new code plug or importing channel data again back into your radio.
Please note that you will need to inhibit or enable the transmit function on a per channel basis per your legal requirements.
Enjoy your new "receive" capability if you were looking to access frequencies above 480 MHz with a much smaller DMR capable radio compared to the Anytone or BTECH models.
Looking for interesting discussion about getting the most from digital voice communications?
Check out www.northstardigitalnet.us for details
K2GOG,
ReplyDeleteThanks again for another great article. I am wondering, where are you finding all these up to date software and firmwares? Alinco doesn't have them listed on their website and I'm only finding new things as you post them.
73
Mike
KD2RPE
https://remtronix.com/land-mobile-radio/digital-radios/dj-md5tgp/
DeleteJust so you guys know, on my DJ-MD5 (non GPS) you only need to hold down the PTT and number 1 button. No need to hold the third proframable button
ReplyDeleteUnfortunately, in the recently released version 1.13c of the firmware, all modes with UHF coverage above 480MHz have been removed.
ReplyDeleteChecked. you are right.
DeleteHI MIKE IF THIS RADIO ARE OPEN FOR HAM BAND AND OUTBANDFOR GMRS,MARS OPERATION
ReplyDeleteTHANKS
Can this radio play APRS?
ReplyDeleteYes the APRS is sended using TG 5057 and local 222999. check for programming the documents writed for MD390 or similar , the procedures is abou same ... 73 , Mauro
DeleteGreat info. When I power up holding PTT and button below it to enter test mode, I get "initialize radio?" instead.
ReplyDeleteHas anyone checked with the 1.13e firmware update released last month?
ReplyDeleteHave you played with the MD5-XTG? I'm trying to find out if you can SEND and RECEIVE SMS through Analog APRS
ReplyDeleteHi i have Problem Can anyone help me with Dj md5 :) i changed info PAHU PAMU and i did not save original value , so can anyone help me with original values ? Test mode press ptt and nr 7 button when swithing on . Waiting for reply sebastian19866891@gmail.com
ReplyDelete